    Returns you to the Online screen, in direct connection with the serial    
    port.   The right mouse button will accomplish the same thing from the    
    GEM menu screen.                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This is how you got here!  You can also hit the HELP key while you are    
    Online to view a help screen about command keys available to you while    
    online.                                                                   
                                                                          
    If Shadow is active and presenting a status, the HELP key will call up    
    Shadow for a status check, to abort a transfer, or save the buffer.       
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Displays  approximately how much free memory (RAM) is left in your ST.    
    May  also be invoked with Alternate-R from the Online mode and the GEM    
    menu.   If  this  number  is  less  than  50,000  at  any time, you're    
    operating  on  luck!   Try  removing some unneeded desk accessories or    
    ramdisks.   If  you're using Shadow and have the SHADOW.ACC installed,    
    REMOVE IT!  You don't need it and you're wasting over 50K!                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Also activated by holding the Control key and pressing the ClrHome key    
    while  in the Online screen.  This will drop the RS232 signal DTR (pin    
    20)  for about 3 seconds and cause most modems to hang up, if they are    
    configured to 'follow DTR' or 'Initialize on loss of DTR'.                
                                                                          
    If your modem does behave this way, and you're using Shadow and intend    
    to press the reset button during a transfer, then you'd better disable    
    the  feature  or  the RESET will hang up the modem as well!  If it's a    
    Hayes compatible, type the command AT&D0 to your modem before starting    
    a Shadow file transfer.  If you have dip switches, set the appropriate    
    switch  to  'Set  DTR  high'  or 'Force DTR' to prevent hangups during    
    system reset.                                                             
                                                                          
                                                                                                                                                                            Toggles  the  ST's  Key  Click sound on and off.  If it is on when you    
    select this, it will be turned off and vice versa.  The menu will show    
    a  check  mark  next  to 'Key Click' if it is on.  May also be toggled    
    from the Online mode by pressing Alternate-C.                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Displays  the  Baud  Rate selection screen from which you may select a    
    desired  baud rate.  You MUST select one of the choices and it will be    
    set as soon as you do.  You will remain at that speed until you either    
    select  a  new  baud  rate  or  select an Autodial entry.  May also be    
    called from the Online mode by pressing Alternate-B.                      
                                                                          
    (Also see Dial Number and Auto Baud Rate help).                           
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Allows  you  to  change the RS232 port settings for Data Bits, Parity,    
    and  Stop Bits and Linefeeds.  Most of the time you will never need to    
    turn Linefeeds on, however some systems will require it.  If you're on    
    a  BBS  or  host that is displaying one line on top of the other, then    
    turn this on.                                                             
                                                                          
    As  for  the other setting, most systems use 8 Data Bits, Parity None,    
    and  one  Stop  Bit, however some may require other settings.  You may    
    exit from this selection without making any changes.  Any changes made    
    and  set  will remain in effect until changed again, or until you exit    
    VanTerm.  The default is always 8/None/1/Linefeeds off.                   
                                                                          
    NOTES: To use PC-Pursuit to Upload Files, set to 8/None/2.                
                                                                                                                                                                            Sets  VanTerm  for  Full  Duplex  communications.  This means the host    
    system  (BBS  etc)  will echo back each character you send to it.  May    
    also be set by pressing Alternate-F while in the Online mode.             
                                                                          
    Most BBS's and host systems use Full Duplex.  (See Half Duplex).          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Sets  VanTerm  for  Half  Duplex  communications.  This means the host    
    system  (BBS  etc)  does  NOT  echo back each character you send to it    
    therefore  VanTerm  will display each character you send.  May also be    
    set  by  pressing  Alternate-H  while  in  the Online mode.  If you're    
    connected  to  someone  else's  modem  and they are in VanTerm or some    
    other  terminal  program,  then you'll want to turn this on so you can    
    see what you're typing to them!                                           
                                                                          
    Very  few  host  systems  use  this.   GEnie is one that does use Half    
    Duplex by default, but even it can be changed to Full Duplex.             
                                                                                                                                                                                                                                                                                                                                                                                                                        Permits  you  change  the  ST date and time.  Once changed the ST will    
    maintain  the  new  time  and  date in both the system and IKBD clocks    
    until  you  change  it  again  or turn your ST power off.  May also be    
    called from the Online mode by pressing Alternate-T.                      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  function  executes  DCOPY*.PRG...  DCOPY is an excellent utility    
    permitting many disk, file, formatting, and ARC functions.  It is MUCH    
    faster  than  ARC,  compresses  better  and  therefore creates smaller    
    archives  than  ARC,  saving disk space and transfer time!  Do NOT use    
    ANY  version of DCOPY other than the one supplied with VanTerm!!  If a    
    new  GOOD  version  of DCOPY comes out, it will be available on most BBS's
    seperately and in future versions of VanTerm.                             
                                                                          
    You can also invoke DCOPY from the online screen with Alternate-O.        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Chains to another program.  This is the same as leaving VanTerm, going    
    back  to  the Desktop, and then executing (double clicking) some other    
    program.  If you know you're going to execute some other program after    
    VanTerm,  this will save you some time and motion!  If the new program    
    requires  parameters,  such  as  a .TTP type editor, you can enter the    
    pathname as well!                                                         
                                                                          
    Use  the GEM file selector to find the desired program, select it, and    
    optionally pass parameters to it (if needed - otherwise just press the    
    Return key.                                                               
                                                                                                                                                                                                                                                                                                                                                                                                                        Suspends VanTerm and executes ANY another program (at your own risk!).    
    Use  the GEM file selector to find the desired program, select it, and    
    optionally  pass  parameters  to  it (if needed - otherwise just press    
    Return).   Once you exit the program you've selected, you'll return to    
    VanTerm.   May  also be called by pressing Alternate-E from the Online    
    mode.                                                                     
                                                                          
    For  some  reason,  the GFA Basic EXEC function occasionally messes up    
    the  RS232 port so you may need to select the Baud Rate option (unless    
    you  select  an  Autodial  entry,  in which case the baud rate will be    
    automatically set unless you have Auto Baud Rate turned off.  See Auto    
    Baud Rate help).                                                          
                                                                                                                                                                                                                                                        Obviously  this  exits VanTerm and returns to the calling program, GEM    
    Desktop, COMMAND shell, depending on from where VanTerm was executed.     
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Displays  your  Autodial directory and selects a number to be dialed.     
    Click  on the desired entry to start dialing or press the RIGHT button    
    to  exit.   If  you  inserted  a  Username  and Password for the entry    
    selected, use the left and right arrow keys (respectively) to send the    
    strings at any time!                                                      
                                                                          
    Install  Chain  Dialing  by holding SHIFT key while selecting.  Select    
    again  while  holding SHIFT to clear that Chain.  Click on any 'Chain'    
    item  to  begin Chain Dialing (or any unmarked item to dial as above).    
    Chain  Dialing  causes  VanTerm  to cycle through each selected number    
    until connected, upon which that entry is cleared and all other Chains    
    remain.   Press  ClrHome to clear all Chains.  Selecting only one item    
    to  CHAIN causes VanTerm to infinitely redial that number, like Repeat    
    Dialing does if enabled.  Also invoked from the online screen with the    
    left mouse button.                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Turns  Repeat  Dialing on or off.  If on a check mark will appear next    
    to this item.  When on and an Autodial entry is selected, VanTerm will    
    keep  dialing  the  number  every  few  seconds until it either gets a    
    CONNECT  message,  or until you press the UNDO key, upon which it will    
    stop  dialing.  If the modem returns one of the 'Fail Strings' (as set    
    up in Edit Dial), VanTerm will retry the number.                          
                                                                          
    Once you are connected or you cancel Repeat Dialing with the UNDO key,    
    Repeat  Dial  will  be turned off.  If you wish to Repeat Dial another    
    number  you must again select this item to turn it on.  Another way to    
    invoke  repeat  dialing  is  to  select  only  one  number  for 'Chain    
    Dialing',  and VanTerm will keep Chaining to that same number until it    
    gets a 'CONNECT' message.                                                 
                                                                                                                                                                        If  on  (check  mark displayed) VanTerm will reset the RS232 port baud    
    rate  according  to the Baud Rate entered into the Autodial entry.  If    
    it  is  off VanTerm will leave the baud rate alone even if an Autodial    
    entry  is  selected.   The  default is ON, and in most cases you would    
    want  it  on.   One  exception  is using VanTerm's Autodial entries to    
    communicate  with PC-Pursuit to dial various numbers once connected to    
    the network.                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  allows  you to keep a copy of everything that transpired    
    during  an  online  session by making a copy of it to a buffer storage    
    area  in  memory.   Can also be toggled open/close with the INSERT key    
    while  online.   If the buffer fills the maximum lines as set, it will    
    automatically close and give you a warning.                               
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You  can  choose  not  to  record  your online session or to terminate    
    recording  at  any  time.   Default  is  with  the  Buffer closed (not    
    recording).   Can also be toggled open/close with the INSERT key while    
    online.                                                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You may choose at any time to erase the contents of the buffer storage    
    area  containing  the recording you are making of you online session.     
    The  buffer  may  also  be  erased  from  the  Online mode by pressing    
    Alternate-Z.                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    With  this  option you may choose to load any text file from disk into    
    the buffer storage area.                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You can write the entire contents of the buffer storage area to a disk    
    file at any time with this option.                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You may make a printed copy of the contents of the buffer storage area    
    by  using  this  option.   In  order  to  support  as many printers as    
    possible, no page breaks are sent at this time.                           
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use  this  option  to  page  through the buffer storage area to find a    
    message  you  wish  to  reply to or a listing of a program you wish to    
    download.   You  can also invoke this by pressing Alternate-D while in    
    the Online mode.                                                          
                                                                          
    Once  in  this function, you can use the arrow keys to move around the    
    buffer,  the  INSERT  key to jump to a selected page (screen), and the    
    UNDO  key to exit the function.  Note that INSERT and Down Arrow (last    
    page)  will not be enabled until you've been to the end of the buffer.    
    This  is because of the method I use to display, which does not permit    
    me  to  calculate, or know, where the end of the buffer actually is in    
    relation to the number of lines displayed on each screen.                 
                                                                                                                                                                                                                                                        As  an  alternative to sending an ASCII file using another option, you    
    can  send  the  contents  of the buffer storage area, loading it first    
    with  a  file  from  disk,  or  you may have 'captured' an interesting    
    message you wish to pass on to another BBS.                               
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  menu  button  gives  you  the  option of setting the size of the    
    buffer  storage  to  any number of lines desired, up to 32767.  Actual    
    memory  is  not taken until needed, and then for only as many bytes as    
    required.  This keeps VanTerm from 'grabbing' all available RAM.  Each    
    line  accepts  up  to  32767 characters, and uses up one line for each    
    Carriage Return received.                                                 
                                                                          
    NOTE: A common size is 1000-2000 lines.                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Function  keys  may  be  used  to send any string of characters, up to    
    32766  characters  long.   Take care to follow the instructions on the    
    edit  page  and  use  <shift-2> instead of commas and '&' for carriage    
    returns  (use ` for real '&' characters!).  This might be used to send    
    a  long  string of instructions to a BBS, instructions that you do not    
    wish  to  retype each time you need them.  To totally erase a function    
    key,  simply  press  the Delete key until all characters are removed.     
    Totally empty keys will display a message that they are empty and will    
    be  ignored  if  you press them while online.  Inserting the character    
    '~'  will cause VanTerm to pause for 1/2 second each time it sees such    
    a  character,  so  you  could  use USERNAME&~~~~PASSWORD& to send your    
    username,  wait  2  seconds,  then  send  the  password and a carriage    
    return.                                                                   
                                                                                                                                                                    Vanterm includes an Autodialer which will set your modem speed, dial a    
    telephone  number,  verify  a modem connection, and install a Name and    
    Password  into  the  left  and  right arrow keys (respectively).  This    
    functions  allows  you  to  enter, delete, and edit up to 30 telephone    
    numbers and useful information for each.                                  
                                                                          
    If your modem is not a 'Hayes compatible' or if you have it programmed    
    for numeric result codes, then you must press the INSERT key from this    
    screen  and change the modem strings to work with YOUR modem.  Then be    
    sure to save the new configuration!                                       
                                                                          
    NOTE: Most problems with Vanterm can be traced directly to using codes    
    which  do  not  work with YOUR modem.  It may be necessary to read the    
    documentation  which  came  with  your  modem  to find the right codes    
    (examples are included which work with Hayes-compatible modems).          
            This  option  allows you to configure Shadow's completion bell (sounds    
    on  completion  of  a  Shadow transfer) and whether or not Shadow will    
    display  block  numbers during file transfer.  If on, the block number    
    will  be  displayed  in  any screen, in any program!  The settings are    
    saved with the configuration.                                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Vanterm  allows  you to keep as many different Dialer and Function key    
    configuration  files  on  disk  as  you like and load them as needed.     
    These  are files that end in '.CFG' and you may name them anything you    
    like.  For instance, you might have one .CFG file for local BBS's, one    
    file for PC-Pursuit and one file for business use.                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    After editing your configuration file, you'll need to save it for your    
    next use.  You will also be asked if you want your directory sorted by    
    the  Name  field.   If  you  answer  yes,  they will most certainly be    
    rearranged alphabetically!  So, if you have a 'special' layout in your    
    directory,  you  may  not  want  to  sort  it!   Sorting is completely    
    optional.                                                                 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  will 'pretty print' the currently loaded configuration.     
    It  is useful for creating hard copies of your configuration files, so    
    they  may be reconstructed in event something happens to your disk, or    
    in  case  you accidentally delete one!  This function replaces the old    
    VTCFGPRT.PRG utility program.                                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  will give you a blank '.CFG' file to edit, name and save    
    for  later use.  If you've never used VanTerm before, and/or therefore    
    have  no  configuration file to be loaded, VanTerm will initialize all    
    function  keys and Dial Directory entries automatically, and display a    
    warning.  You can now edit them and save a configuration.  If you HAVE    
    already  loaded a configuration and you select this, the function keys    
    and  dial directory will be totally cleared! You default path settings    
    and buffer size will remain intact, however.                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This routine permits you to adjust all four colors on a color monitor,    
    or  swap black and white on a monochrome monitor.  You can also select    
    what  I  consider  to  be  optimum  colors, or revert to your original    
    desktop  colors  (the colors in effect when you executed VanTerm).  If    
    you  get  the colors so screwed up that you can't even SEE what you're    
    doing  (very possible!), you can hit the UNDO key and that will return    
    you  to your original settings as well, to recover your display.  Once    
    you get the settings you desire, you can then save your configuration,    
    and  the  color  settings  will be saved as well, so the next time you    
    load that configuration, your colors will return.                         
                                                                                                                                                                                                                                                                                                                                                                                                                    You  may  want  the  WXYModem Transfer Utility (WXYTR.TTP), downloaded    
    files,  and  files  for  uploading  to  reside on various disks and/or    
    folders   other  than  your  default  (VANTERM.PRG)  directory.   This    
    function  allows  you  to tell VanTerm where to find the utilities and    
    files  for  uploading and where to send any downloaded files.  Be sure    
    to find and CLICK ON WXYTR.TTP when asked!                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If  this  item  is  check-marked, VanTerm will use Shadow for all file    
    transfers  automatically.  If not check-marked, VanTerm will use WXYTR    
    as   it   always   has.    The  current  setting  is  saved  with  the    
    configuration.   You  may also toggle Shadow on or off from the OnLine    
    screen by pressing Alternate-W.                                           
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option allows you to upload (sent to a remote Computer) any ASCII    
    (text) file in normal ASCII mode (or to use Shadow as a capture buffer    
    in  Receive  mode!).   Make sure the receiving Computer knows that you    
    are  sending  the file in this mode.  If Shadow is active, then Shadow    
    will  take  care  of the ASCII file transfer.  NOTE:  Shadow will also    
    handle ASCII *RECEIVE* if it is enabled, which is just like using your    
    capture  buffer,  but faster!  This gives you the entire Shadow buffer    
    for receiving!                                                            
                                                                          
    Alternate-A will also invoke this function from the OnLine screen.        
                                                                                                                                                                                                                                                                                                                                                                                                                        This  is an intelligent XModem send facility provided by the excellent    
    WXYTR  utility.   It  will  send  the  file  in XModem/CRC mode if the    
    receiving  Computer supports that mode and sends XModem/checksum if it    
    does not.  This sends the normal 128 byte packet.                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  is the same as XModem/CRC except the Packet size is 1024    
    bytes  (1K).   On  the receiving end, BBS's sometimes call this option    
    Ymodem,  but  that  is  incorrect!   This  is  XModem-1K!   YModem  is    
    XModem-1K  with  Batch  (multiple file transfer) ability.  Alternate-K    
    will also invoke this from the OnLine screen.                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This   Menu  Button  receives  a  file  sent  to  you  in  XModem/CRC,    
    XModem/checksum  or  XModem-1K.   It can sense the mode of the sending    
    unit  and  adjust  to  those parameters.  Alternate-X will also invoke    
    this from the OnLine screen.                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option prepares a batch of files for YModem (Batch) SEND and MUST    
    be  executed  before the SEND option is permitted.  Simply select each    
    file  you  desire to send in Batch mode by either double clicking each    
    file,  or clicking once on each file to highlight it, then clicking on    
    OK  or  pressing  the  RETURN  key.  Select OK or press Return WITHOUT    
    selecting  a  file  will  save  the  selected  filenames  and exit the    
    function.   Selecting  CANCEL  will abort the procedure without saving    
    any filenames.                                                            
                                                                          
    This  function  may  be  executed  from  the  online  mode by pressing    
    Alternate-U.                                                              
                                                                                                                                                                                                                                                                                                                                        This  option  instructs  VanTerm  to SEND all selected files in YModem    
    (Batch) mode!  At this writing, few BBS's support this, but you can at    
    least send groups of files to other VanTerm owners!                       
                                                                          
    In  order to select this function, you must have first selected YModem    
    (Batch) SETUP and selected at least 1 file for Batch transfer.  If you    
    have  not  done  this, you'll get an alert telling you so.  Otherwise,    
    this  function  will  display all files selected and their statistics,    
    give  you  a  last  chance  to  send  or  abort,  prompt  you  for the    
    CRC/Checksum mode, and begin the transfer.                                
                                                                          
    This  function  may  be  executed  from  the  online  mode by pressing    
    Alternate-G.                                                              
                                                                                                                                                                            This  Option  allows  Vanterm  to receive files sent in YModem (batch)    
    mode.   The sending BBS must support this mode of file transfer and be    
    ready to send before you select it.                                       
                                                                          
    NOTE:  Do  not  try  to  name the files that are being sent to you, as    
    Vanterm  will  automatically  get the names during file transfer.  All    
    you need to select is the FOLDER to receive the files.  If the default    
    folder is acceptable, just click on OK to start.                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This  option allows you to send a file using CompuServe B protocol, IF    
    and  ONLY  if you have Shadow.  CompuServe itself and a very few BBS's    
    support this protocol.                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option allows you to receive a file using CompuServe B protocol,    
    IF and ONLY if you hae Shadow.  CompuServe itself and a very few BBS's    
    support this protocol.                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  button,  when selected, will allow you to set the DEFAULT disk.     
    That  is  the disk Vanterm will use for most of the other DISK options    
    unless  you  have  set up various disks and/or folders for specialized    
    uses using the PATH options.  Click on [Exit] or hit the Return key to    
    exit this function.                                                       
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You  may  select  a  drive and view the amount of unused space that is    
    left  on  that  drive.   Click on [Exit] or hit the Return key to exit    
    this function.                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  Menu button will show you a directory of the DEFAULT drive.  You    
    may  see  a directory of another drive by typing the drive and path in    
    the  top  line,  then clicking on the shaded bar at the top of the GEM    
    directory window.                                                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This Menu Button allows you to make a new folder on the DEFAULT drive.    
    You may change the disk/path to make the folder on using the SET DRIVE    
    Menu Button or by typing the drive and path on the top line of the GEM    
    box  then  clicking  on the shaded bar at the top of the GEM directory    
    window.                                                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  Menu button allows you to delete any Folder and ALL files within    
    that folder, so be CAREFUL!!!.  (See Make Folder)                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    With this option you may page through any ASCII (text) file on disk.      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Select  any  file  you  wish to delete.  Repeat to delete more files.     
    Select  CANCEL  when  finished.  Entering '*.*' will delete ALL files,    
    just  as entering '*.TXT" will delete all files ending in .TXT, and so    
    on according to standard TOS filemask conventions, so be CAREFUL!!!       
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You  may  choose to change the name of any file with this option.  You    
    can  also  create  filenames with special characters, and you can also    
    change  the  path  of  the  file (like moving it)!  Read the displayed    
    instructions when you invoke this function.                               
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Simply  follow  the instructions to copy any file from any disk to any    
    other.  You  may  change the name of the file while copying by using a    
    new name for the destination file.                                        
                                                                          
    You  will  also be asked to choose the date and time of the new (copy)    
    file,  that  is,  whether  you want the current date/time the file was    
    copied/created,  or  if you'd like the copy to retain the date/time of    
    the original.                                                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This  option  gives  you statistics about a disk file, including total    
    bytes  (characters) in the file, XModem 128 byte and 1024 byte blocks,    
    and  the  approximate  time  required to transfer the file at the baud    
    rates supported by VanTerm.  Just follow the instructions!                
                                                                          
    Alternate-I will invoke this function while in the online screen.         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    